Mansfield 123-4090 400 Series Faucet Stem
Mansfield 123-4090 400 Series Faucet Stem
2 Currently in stock.
In stock orders received by 4:00 PM eastern time on a business day will ship the same day!
Couldn't load pickup availability
Mansfield 123-4090 400 Series Faucet Stem. This stem is made for a 4 inch frost protection, but the stem will measure about 8" from end to end. When measuring the stem make sure that the spring-loaded piece on the end of the stem is pressed out. This stem comes complete with the packing washer, and packing. This stem does not come with the packing nut. The washers and O-rings on the spring-loaded end will also come with the stem. The Mansfield 123-4090 stem comes with one end being spring loaded. The spring loaded end goes inside the body of the faucet. The stem itself is copper. However the spring loaded end is brass. Mansfield 400 Series Faucets where made from mid 2006 to present. For example, if your faucet was made in 2010 it is a 400 Series faucet. Another way to identify the series of faucet you have is by the handle turns. On the 400 series stems the handle will turn 180 degrees. Therefore to turn on the faucet the handle will turn half of a full rotation. The 400, and 500 series faucets are often mistaken for each other. The faucets, and the stems will look identical. The only difference being the thread pitch at the end of the stem, which means a 400 series stem cannot thread into a 500 series faucet, and a 500 series stem cannot thread into a 400 series faucet.