Mansfield 123-4093 400 Series Faucet Stem
Mansfield 123-4093 400 Series Faucet Stem
5 Currently in stock.
In stock orders received by 4:00 PM eastern time on a business day will ship the same day!
Couldn't load pickup availability
Mansfield 123-4093 400 Series Faucet Stem. This stem is made for the 8 inch frost protection (as shown on the package), but the stem will measure about 12" from end to end. When measuring the stem it is extremely important to have the spring-loaded piece pushed out, and measure the complete stem from tip to tip. This stem comes with the packing washer, spring-loaded end and packing. This stem does not come with the packing nut. The spring-loaded end of the stem will go into the body of the faucet, and thread in. The squared piece on the end of the stem is where the handle screw goes into it. The handle on the 400 series stem turns 180 degrees on, Therefore to turn on the faucet the handle will turn half of a full rotation. The Mansfield 400, and 500 series faucets are often confused with one another. This is most likely due to the fact that the faucets look identical. The only difference in the two faucets is the thread pitch on the end of the stem assembly. The best way to identify the difference between the 400, and 500 faucets is by the age. The 400 series was made from 2006 to present, and the 500 series was made prior to 2006. If you are not sure of the age of the faucet you can also identify it by the amount of turns the handle make before the faucet is turned on. The 400 series is a half turn, and the 500 series is a full turn.



