If the faucet is leaking around the center of the stem it is most likely due to the packing on the stem. If the packing on the stem is worn it will allow the water to leak around the center of the stem. This issue can be solved by replacing the stem assembly.
Arrowhead Brass offers two versions of the stem. The SP version is for faucets put in before 1999. Another way to tell if you have the SP version is if the stem is spring loaded on the end. If it is, then you would have the SP version. In order to get the correct stem you would need to know the total length of the stem. For the total length you will need to measure from where the handle attaches to the opposite end. You will also need to make sure that the check assembly, located on the end of the stem is pushed into the stem when measuring it. The last digit on the part number for the stems represent wall thickness, not total length. You will need to add 4 to the last digit of the part number for total length. For example the PK2006 stem assembly is for a wall thickness of 6 inches, and the total length is 10 inches. If you are not sure, and the stem is 14" or below, you can use thestem kit SL14-AS. This kit will come with Instructions, tools, and a template. Also on the back of the pack is a list of instructions.
See below for help finding the correct stem for your faucet
Choosing a selection results in a full page refresh.
